One Side PTFE Coated Fiberglass Fabrics2022-06-02T01:43:17+00:00
Home/Products/PTFE Coated Fabrics/One Side PTFE Coated Fiberglass Fabrics

One Side PTFE Coated Fiberglass Fabrics

Get A Quote

The Details of One Side PTFE Coated Fiberglass Fabrics

One Side PTFE Coated Fiberglass Fabrics has 100% nonstick surface, chemical resistance and high tensile strength, the material is light weight but with extra smooth surface. One side PTFE fiberglass is produced under special process to make one side with PTFE coating to provide non-stick smooth surface and another side without any coating for typical applications.

Products

The Specifications of One Side PTFE Coated Fiberglass Fabrics

  • Material: PTFE coating + Woven fiberglass substrate

  • Thickness: 0.16mm

  • Standard width: 1000mm(39”) and 1250mm (49”)

  • Normal length are 30m, 33m, 50m per roll

  • We also have PTFE fiberglass with one side PTFE etched available

The Advantages of One Side PTFE Coated Fiberglass Fabrics

  • High and low-temperature resistance -73-260 ℃(-100-500℉)

  • One side without coating, can be applied with adhesive for some applications

  • One side with a smooth and non-stick surface

  • Resistance to atmospheric aging, radiation, and low permeability

  • Long-term exposure to the atmosphere

  • Non-combustibility

  • Insulation, small dielectric loss, and high breakdown voltage

The Applications of One Side PTFE Coated Fiberglass Fabrics

In the carbon fiber products industry: Some carbon fiber panels are shaped by the compression molding process, one side PTFE impregnated fiberglass is used as a release sheet during this process. The fabric withstands temperature up to 260 ℃(500℉) for a long time working and max temperature to 360 ℃. One side surface is 100% nonstick, smooth and chemical resistant, another side is without coating, can be applied with adhesive, then stick the fabric on a hot plate to change to a nonstick surface.

The Applications of One Side PTFE Coated Fiberglass Fabrics

In the carbon fiber products industry: Some carbon fiber panels are shaped by the compression molding process, one side PTFE impregnated fiberglass is used as a release sheet during this process. The fabric withstands temperature up to 260 ℃(500℉) for a long time working and max temperature to 360 ℃. One side surface is 100% nonstick, smooth and chemical resistant, another side is without coating, can be applied with adhesive, then stick the fabric on a hot plate to change to a nonstick surface.

Get in touch
with me

Mobile: +86-18679211896

Follow us

Related Products

0.55mm Brown/White PTFE Sheet

PTFE Sheet for Heat Press Transfer

Latest News

Go to Top